Anti Slip Tape

Anti Slip Tape, also known as non-slip tape, safety grip tape, or traction tape, is a pressure-sensitive tape with a top surface coated with abrasive particles (such as aluminum oxide, silicon carbide, or mineral aggregate) bonded to a durable PVC, polyester, or aluminum backing. It provides instant slip resistance on stairs, ramps, walkways, platforms, and any surface where wet, oily, or high-traffic conditions create a fall hazard.

Widely used in industrial facilities, commercial buildings, public transport, marine vessels, and residential homes, anti slip tape is the fastest, most cost-effective way to bring walking surfaces into compliance with workplace safety standards (OSHA, ADA, AS/NZS 4586, DIN 51130).

Send An Inquiry

Detailed Introduction

Features:

Instant Traction: Embedded abrasive grit (aluminum oxide, silicon carbide, or quartz) delivers a high coefficient of friction (COF ≥ 0.6 wet/dry) that stops slips instantly.
Pressure-Sensitive Adhesion: Aggressive rubber or acrylic adhesive bonds permanently to clean, dry surfaces — wood, concrete, metal, tile, fiberglass, and painted floors.
Weather & UV Resistant: PVC/aluminum backing and UV-stable grit survive outdoor sun, rain, frost, and saltwater spray.
Oil & Chemical Resistant: Select grades resist industrial oils, hydraulic fluids, fuels, and mild acids — ideal for workshop and garage floors.
Conformable: Thin, flexible backing wraps around stair nosings, curved edges, and drum surfaces without lifting.
Easy to Install: Peel-and-stick application; no mixing, clamping, or drying time. Cut to size with scissors or knife.
Visible Safety Marking: Available in yellow, black, yellow/black stripe, and glow-in-the-dark for low-light hazard identification.
Removable Options: Low-residue adhesive grades available for temporary events and rental spaces.

Applications:

Stairs & Steps: Residential staircases, commercial stairwells, fire escapes, bus/train steps.
Ramps & Inclines: Wheelchair ramps, loading ramps, vehicle access ramps, stage ramps.
Walkways & Platforms: Warehouse aisles, factory catwalks, scaffolding planks, mezzanine floors.
Kitchens & Bathrooms: Commercial kitchen floors, shower floors, pool surrounds, restaurant prep areas.
Marine & Boating: Boat decks, swim platforms, dock gangways, fishing vessel surfaces.
Vehicles: Truck beds, van floors, trailer ramps, RV steps, heavy equipment access.
Public Spaces: School hallways, hospital entrances, museum galleries, theater aisles.
Industrial: Oil rig platforms, refinery walkways, chemical plant flooring, machine shop floors.

Technical Specifications:

Parameter	Typical Range
Top Surface	Mineral aggregate (aluminum oxide / silicon carbide / quartz)
Backing Material	PVC (standard) / Polyester (conformable) / Aluminum (heavy-duty)
Grit Grade	Fine (60–80 mesh) / Medium (36–60 mesh) / Coarse (24–36 mesh)
Adhesive Type	Rubber-based (standard) / Acrylic (UV/weather resistant)
Color	Black, Yellow, Black/Yellow Stripe, White, Red, Green, Blue, Glow-in-the-Dark
Total Thickness	0.7 – 2.0 mm (backing + grit)
Width	12 mm – 915 mm (common: 25 / 50 / 75 / 100 / 150 mm)
Length per Roll	5 m – 18 m (common: 5 m / 10 m / 15 m)
Core Size	1" (25 mm) or 3" (76 mm)
Coefficient of Friction (Dry)	≥ 0.8 (ASTM D2047)
Coefficient of Friction (Wet)	≥ 0.6 (ASTM D2047)
Temperature Range	-20°C to +80°C (standard); up to +120°C (select grades)
Water Resistance	Excellent (PVC/aluminum backing)
UV Resistance	Good to Excellent (acrylic adhesive grades)